Drilling
Brand: TORK CRAFT
MPN: TC SE05
TorkCraft - Screw Extractor
Size: M14 - M18
Diameter: 7 0mm
Recommended Drill Size: 9.0 mm
Shank: 8.5mm Square Shank
Application:
The Tork Craft Screw Extractor is for the removal of broken bolts and studs,
made of carbon steel. Determine the size of the bolt and the desired
extractor size, use a file and flatten the broken bolt surface, usually
bolts that broke are left with an uneven surface.
Locate the center on the flattened surface and mark with a cent..
N$ 28.75
Ex VAT:N$ 25.00
Brand: TORK CRAFT
MPN: TC SE06
TorkCraft - Screw Extractor
Size: M18 - M24
Diameter: 10 0mm
Recommended Drill Size: 12.0 mm
Shank: 12.0mm Square Shank
Application:
The Tork Craft Screw Extractor is for the removal of broken bolts and studs,
made of carbon steel. Determine the size of the bolt and the desired
extractor size, use a file and flatten the broken bolt surface, usually
bolts that broke are left with an uneven surface.
Locate the center on the flattened surface and mark with a c..
N$ 33.58
Ex VAT:N$ 29.20
Brand: TORK CRAFT
MPN: TC41012
Screw Extractor & Drill Bit Set - 12-Piece
Drill Bits: 2, 3, 4, 5, 7, 10mm
Extractors: #1, #2, #3, #4, #5, #6
Expand your tool set with the 12-Piece Screw Extractor and Drill Bit Set. It's able to remove broken or damaged
screws from a workpiece. It's essentially a reverse-threaded screw that grips the broken screw's threads and allows
you to unscrew it.
Application:
Extraction of stripped bolts, screws and studs.
Automotive
Construction
Maintenance
DIY....
N$ 470.35
Ex VAT:N$ 409.00
Brand: TORK CRAFT
MPN: TC SE06007
Tork Craft Screw Extractor Set — 5-Piece (Left-Hand Spiral)
Packaging: Plastic case (sold as set)
A compact kit of five left-hand spiral extractors for removing snapped screws, bolts and studs. Drill a pilot in reverse, drive in the matching extractor, and back the fastener out as the spiral bites. Ideal for maintenance, fabrication and workshop repairs.....
N$ 69.69
Ex VAT:N$ 60.60
Brand: TORK CRAFT
MPN: TZ AC26-10-12
Screw Pilot
90° Countersink
with drill bit
A convenient power tool accessory. Allows you to drill a hole and simultaneously
countersink the hole for screws.
A
common use is to allow the head of a countersunk bolt or screw, when placed in
the hole, to sit flush with or below the surface of the surrounding material.
This accessory will just allow you to drill and countersink in a singel step.
Accurate at all times and a very neat job.
A countersink is a conical
hole cut i..
N$ 218.50
Ex VAT:N$ 190.00
Brand: TORK CRAFT
MPN: T SP10075C
Screw Pilot No.10
Screw Pilot #10 Screw Gauge - 3.2mm Drill bit
Convenience in one operation
Drill pilot hole and countersink in one operation
Use with 6.35mm (1/4 inch) quick release chuck / connector or conventional
chuck....
N$ 118.45
Ex VAT:N$ 103.00
Brand: TORK CRAFT
MPN: T SP12075C
Screw Pilot No.12
Screw Pilot #12 Screw Gauge - 3.5mm Drill bit
Convenience in one operation
Drill pilot hole and countersink in one operation
Use with 6.35mm (1/4 inch) quick release chuck / connector or conventional
chuck....
N$ 140.88
Ex VAT:N$ 122.50
Brand: TORK CRAFT
MPN: TZ AC26-6
Screw Pilot
90° Countersink
with drill bit
A convenient power tool accessory. Allows you to drill a hole and simultaneously
countersink the hole for screws.
A
common use is to allow the head of a countersunk bolt or screw, when placed in
the hole, to sit flush with or below the surface of the surrounding material.
This accessory will just allow you to drill and countersink in a singel step.
Accurate at all times and a very neat job.
A countersink is a conical
hole cut i..
N$ 178.83
Ex VAT:N$ 155.50